7.1 准备：在常温下打开试验箱门，将试验组件及其他所需仪器（如电流计

7.1 准备：在常温下打开试验箱门，将试验组件及其他所需仪器（如电流计）按相应试验要求安装在试验箱内，如需要测试组件温度，则需将通道3 对应的3#传感器连接到被测组件上，同时应对各组件做好标记并记录组件信息，完成准备后关好室门

ผลลัพธ์ (อังกฤษ) 1:

7.1 preparation: at room temperature, open the Chamber door, will be required to test components and other instruments (such as current dollars) according to the test requirements for installed inside the test Chamber, if necessary to test the component temperatures, you need to set corresponding to the channel 3 3# sensor connected to the component to be measured, while dealing with the component label component information and records to complete preparations to close the room door

ผลลัพธ์ (อังกฤษ) 2:

7.1 Preparation: Open the chamber door at room temperature, the test components and other equipment required (such as current dollars) by the appropriate test to be installed in the test chamber, such as the need to test the temperature of the module, you need to channel 3 corresponding sensor 3 # connected to the test assembly, while addressing the various components of well marked and after recording assembly information, complete the preparation room door shut

ผลลัพธ์ (อังกฤษ) 3:

7.1 ready: at room temperature, open the box door test, component test and other equipment (such as ammeter) according to the corresponding test requirements is installed in the test box, such as the need to test component temperature, channels corresponding to three 3 sensor connected to measured components, while coping with the components do mark and record the information of components, closing the room door after the completion of the preparation.