背板褶皱时受光面不能有重叠，不能乱写，组件背面褶皱深度≤0.5mm,且

背板褶皱时受光面不能有重叠，不能乱写，组件背面褶皱深度≤0.5mm,且长度≤50mm，不超过3 处；背板凸起≤0.5mm；背板偏离最大处＜2mm。

ผลลัพธ์ (อังกฤษ) 1:

Back panel can have no overlapping folds when illuminated, cannot write, back fold depth the components 0.5mm and length ≤ 50mm does not exceed 3; back bulge 0.5mm; back off Max <2mm.

ผลลัพธ์ (อังกฤษ) 2:

Smooth fold back when not overlap that can not scrawl, Rear Components wrinkle depth ≤0.5mm, and the length ≤50mm, not more than 3; back projection ≤0.5mm; backplane maximum deviation at <2mm.

ผลลัพธ์ (อังกฤษ) 3:

Backplane fold by smooth not overlapping, not scribble, assembly back fold depth is less than or equal to 0.5 mm and 50mm in length is less than or equal to, no more than 3; backplane raised less than or equal to 0.5 mm; backplane deviation maximum < 2mm.