技 术 要 求1.轴体整体调质处理HRC27～32。2.未注倒角0.5

技 术 要 求
1.轴体整体调质处理HRC27～32。
2.未注倒角0.5×45°。
3.去除尖角、毛刺。
4.轴体两端对称制作。

ผลลัพธ์ (อังกฤษ) 1:

Technical requirements1. shaft quenched and HRC27~32 as a whole.2. angle of 0.5x45 °.3. remove the sharp corners, burrs.4. axial symmetric at both ends production.

ผลลัพธ์ (อังกฤษ) 2:

Technical Requirements
1. The overall quenching shaft 32 ~ HRC27.
2. Un chamfer 0.5 × 45 °.
3. Remove the sharp corners, burrs.
4. symmetry axis both ends production.

ผลลัพธ์ (อังกฤษ) 3:

Technical requirements1 axle body whole quenching and tempering treatment HRC27 ~ 32.2 note 0.5 x 45 degree chamfer.3 removal of sharp edges, burrs.4 axis symmetrical production.