玻璃表面划伤，宽度≤0.1mm,长度≤50mm， 允许有4 条/M2；

玻璃表面划伤，宽度≤0.1mm,长度≤50mm， 允许有4 条/M2；宽度在0.1～0.5 mm，，长度≤50mm 允许有1条/M2。玻璃上的刻痕、缺口和碎片应在离玻璃边缘向内深度＜4mm，同时每一边的总长加起来应＜20mm

ผลลัพธ์ (อังกฤษ) 1:

Scratch the glass surface, width ≤ 0.1mm, length ≤ 50mm, 4/M2 is allowed; width 0.1~0.5 mm, length ≤ 1/M2 50mm allowed. Nicks on the glass, gaps in depth inward from the edges of the glass and debris should be <4mm, and each side should add up the total length <20mm

ผลลัพธ์ (อังกฤษ) 2:

Glass surface scratches, width ≤0.1mm, length ≤50mm, allow 4 / M2; width 0.1 ~ 0.5 mm ,, length ≤50mm allowed a / M2. Nicks, notches and debris on the glass should be inward from the edge of the glass depth <4mm, while the total length of each side should add up to <20mm

ผลลัพธ์ (อังกฤษ) 3:

Glass surface scratches, width is less than or equal to 0.1 mm, length is less than or equal to 50mm, allowing four / m2; width ranging from 0.1 to 0.5 mm, length is less than or equal to 50mm allows a / m2. Glass nicks and gaps and debris should be in from the edge of the glass inward depth < 4 mm and the length of each side together should be < 20mm