1.3确认测试环境符合规定要求：环境温度25±2℃，湿度≤65% ，红

1.3确认测试环境符合规定要求：环境温度25±2℃，湿度≤65% ，红外测温探头必须正对组件背板如图（3），并确认组件温度为25±2℃。.

ผลลัพธ์ (อังกฤษ) 1:

1.3 Recognizing the test environment meet the requirements: an ambient temperature of 25 ± 2 ℃, humidity ≤ 65%, infrared temperature probe must be facing the components back panel as shown in figure (3), and verify that the component temperature of 25 ± 2 ℃..

ผลลัพธ์ (อังกฤษ) 2:

1.3 confirmation test environment to meet the requirements: Ambient temperature 25 ± 2 ℃, humidity ≤65%, infrared temperature probe must be facing the assembly backplane Figure (3), and confirm the component temperature of 25 ± 2 ℃. .

ผลลัพธ์ (อังกฤษ) 3:

1.3 confirmations test environment conform to specified requirements: ambient temperature 25 plus or minus 2 DEG C, humidity is less than or equal to 65%, the infrared temperature probe must be facing the backplane assembly as shown in figure (3), and confirm the component temperature for 25 plus or minus 2 DEG C. .