进行抗剥试验时，在太阳能电池区和互连带下侧（焊接接缝）部位之间，试验台

进行抗剥试验时，在太阳能电池区和互连带下侧（焊接接缝）部位之间，试验台应设置为180度角。如下图所示

ผลลัพธ์ (อังกฤษ) 1:

Peel test, in solar cells and interconnect with side (solder joint) between the tests should be set to an angle of 180 degrees. As shown in the following figure

ผลลัพธ์ (อังกฤษ) 2:

When the peel test, in the solar cell area and the interconnection between vaginal discharge side (welded joints) site, test station should be set to 180 degrees. As shown below

ผลลัพธ์ (อังกฤษ) 3:

Anti peeling test, in solar cell area and interconnect underside of the ribbon (weld seam) between the site and test station should be set to an angle of 180 degrees. As shown below