1、碱绒6#3#7#均有下排管道漏液的情况，原因是下排管道的活借口松动

1、碱绒6#3#7#均有下排管道漏液的情况，原因是下排管道的活借口松动。
解决办法：厂商直接把接口处用焊条焊死
人为原因：员工和厂商经常在管道上面走动，导致活接松动
预防措施：口头告知员工不要踩踏排液管道，并在管道上方放置金属桥过道。
2、碱绒1#7月24号发现操作面电脑斜落于机台上，经排查发现固定电脑手臂的螺丝只有三颗，其中还有两颗滑了拧不紧。
解决办法：加一颗螺丝，在螺丝上加上防水胶带，拧紧。
预防措施：每周巡检机台上方的情况；告知操作界面的员工别大幅度的摆操作面。

ผลลัพธ์ (อังกฤษ) 1:

1, base down 6#3#7# exhaust pipe leakage, because living excuse for exhaust pipe loose.Solutions: manufacturers covered electrodes for welding seams deadHuman causes: employees and vendors often walk the pipeline, resulting in loose livePrecautions: verbally advised employees not to tread on the discharge pipe, and metal bridge over the pipeline corridor.2, base down 1#7 24th discovery computer inclined to fall in the machine, the investigation found that fixed the computer arm of only three screws, which also has two sliding screw is not tight.Solution: Add a screw, combined with waterproof tape on the screw and tighten.Preventive measures: inspection machine at the top of each week; inform employees have a substantial swing operation interface.

ผลลัพธ์ (อังกฤษ) 2:

1 , base down 6 # 7 # 3 # are leaking pipe under the situation closely, because living under the pretext of discharge pipe loose.
Workaround: Manufacturer directly interface with the welding electrode dead
man-made causes: employees and vendors often walk on the pipeline, resulting in loose union
precautions: orally inform employees not to trample the discharge pipe and placed a metal bridge over the pipeline corridor.
2 , the base velvet 1 # 7 Yue 24 Hao found that computer operation plane ramp down on the machine table, the investigation found that the fixed arm screws only three computers, of which there are two slip twist is not tight.
The solution: add a screw, with waterproof tape on the screws and tighten.
Preventive measures: inspection platform side every week; the staff to inform the operator interface do not put substantial operating surface.

ผลลัพธ์ (อังกฤษ) 3:

Liquid leakage in 1, 6#3#7# had lower alkali cashmere pipelines, the reason is an excuse to lower pipeline loose living.Solution: manufacturers directly to the interface with the electrode weldingMan-made reasons: employees and vendors often walk around the pipe, resulting in loose groundPreventive measures: verbally inform employees not to trample the liquid discharge pipe, and place the metal bridge aisle at the top of the pipe.2, alkali cashmere 1#7 month 24 found that the operation of the computer on the table, after the investigation found that the fixed computer arm screws only three, of which there are two out of the screw is not tight.Solution: add a screw, the screw with the waterproof adhesive tape, tighten.Preventive measures: weekly inspection on the top of the machine; inform the operator interface of the staff do not have a large swing of the operating surface.