0.5≤起焊与收尾2cm处焊带偏移＜0.8mm，且主栅线无明显露出

0.5≤起焊与收尾2cm处焊带偏移＜0.8mm，且主栅线无明显露出

ผลลัพธ์ (อังกฤษ) 1:

0.5 ≤ and ending 2cm welding with offset <0.8mm, and no obvious major grid lines showing

ผลลัพธ์ (อังกฤษ) 2:

0.5≤ from welding and ending at 2cm ribbon offset <0.8mm, and the main gate line no exposed

ผลลัพธ์ (อังกฤษ) 3:

0.5 welding and 2cm welding ending up with offset is less than 0.8mm, and the main gate line was exposed