施加交流正弦波50赫兹电压2500伏施加时间1秒施加部位如下所有带电部

施加交流正弦波50赫兹
电压2500伏
施加时间1秒
施加部位如下
所有带电部件与裸露导电部件之间
每极和为此试验连接到相应连接的裸露导电部件上的所有其他极之间
例行检验时，施压时间为1秒，确认检验时，施压时间为5秒
结论：不可有击穿或闪络现象

ผลลัพธ์ (อังกฤษ) 1:

Applying AC sine wave 50 HzVoltage 2500 vApplication time 1 secondApplied parts as followsBetween all live parts and the exposed conductive partsAnd tests for each pole is connected to the connection between the exposed conductive parts of all otherRoutine inspection, pressed for 1 second, confirming test, pressure for 5 secondsConclusion: no breakdown or flashover phenomena

ผลลัพธ์ (อังกฤษ) 2:

Applying an AC sine wave 50 Hz
voltage 2500 V
applied to the time one second
parts are applied
between all live parts and exposed conductive parts
per pole and do this test between all the other poles connected to the exposed conductive parts of the corresponding connection
when routine tests , pressing time of 1 second, when the verification test, the pressure time is 5 seconds
Conclusion: Do not have a breakdown or flashover

ผลลัพธ์ (อังกฤษ) 3:

Applying sine wave AC 50 Hz
voltage 250 V
applied time 1s
applied parts are
all live parts and exposed conductive parts between
each pole and for the trial is connected to corresponding connecting bare between conductive parts on all other
routine inspection, pressure time for a second, confirm the inspection, time pressure for 5 SEC
conclusion: no breakdown or flashover phenomenon