玻璃气泡：不允许开口气泡；圆形气泡直径＜0.5mm，不限个数，直径0.

玻璃气泡：不允许开口气泡；圆形气泡直径＜0.5mm，不限个数，直径0.5≦L

ผลลัพธ์ (อังกฤษ) 1:

Glass bubble: do not allow open bubble; round bubble diameter <0.5mm, unlimited, a diameter of 0.5 ≦ L<1.5mm, 5.5 times the number of times the area is permitted; 1.5mm ≦ L<3mm in diameter, 1 time the number of times the component area is permitted; >3mm in diameter are not allowed; square bubble width w ≤ 0.5mm, diameter <1.5mm, unlimited, diameter 1.5 ≦ L<3mm, allow 1 time the number of times the area ; 3mm ≦ L<5mm in diameter, 0.5 times the number of times the component area is permitted; >5mm in diameter are not allowed; width 0.5 ≦ L<1.5mm, <1.5mm in diameter, 5.5 times the number of times the component area is permitted, diameter 1.5 ≦ L<3mm, 1 time is allowed the number of times the area of diameter >3mm is not allowed

ผลลัพธ์ (อังกฤษ) 2:

Glass bubbles: Do not allow open pores; circular bubble diameter <0.5mm, limited number, diameter 0.5 ≦ L <1.5mm, 5.5 times the number allowed in the area; the diameter of 1.5mm ≦ L <3mm, allowed 1 times The number of assembly area; diameter> 3mm, No; square bubbles wide W≤0.5mm, diameter <1.5mm, limited number, diameter 1.5 ≦ L <3mm, allow the existence of a number of times the area; the diameter of 3mm ≦ L <5mm, 0.5 times the number of allowed component area; diameter> 5mm, No; width 0.5 ≦ L <1.5mm, diameter <1.5mm, 5.5 times the number allowed in the assembly area, the diameter of 1.5 ≦ L <3mm , allowed a number of times area; diameter> 3mm, allowed

ผลลัพธ์ (อังกฤษ) 3:

1.5 >5mm 1.5; component; the existence of 0.5; glass bubble: not allowed to open bubble round bubble diameter < 0.5 mm, not limited to the number, diameter is less than or equal to L<1.5mm allowing 5.5 times area a number of 1.5mm in diameter is less than or equal to L<3mm allowing are fold area number diameter >, does not allow; square bubble width W is less than or equal to 0.5 mm diameter < 1.5mm, does not limit the number of diameter less than or equal to L<3mm allowing are times area number; diameter less than or equal to 3 mm L<5mm allowing 0.5 times assembly area number, diameter, not allow; width of 0.5 is less than or equal to L<1.5mm diameter < 1.5 mm, allowing the existence of 5.5 times the component area number, diameter is less than or equal to L<3mmAllows the existence of 1 times the size of the area; >3mm diameter, not allowed