在正式对组件做盐雾腐蚀试验前，先按照步骤5.2.1 至5.2.2，将机

在正式对组件做盐雾腐蚀试验前，先按照步骤5.2.1 至5.2.2，将机器运行12 小时以上，并注意计量筒内烟雾沉降量是否是1～2ml/h，如若不对可调节喷雾塔高度，来达到要求。（如图7）

ผลลัพธ์ (อังกฤษ) 1:

In front of the salt spray corrosion test of the component, as per the step 5.2.1 to 5.2.2, the machine runs for more than 12 hours, and pay attention to smoke within the measuring tube whether the settlement is 1~2ml/h, if not height adjustable spray Tower, to meet the requirements. (See Figure 7)

ผลลัพธ์ (อังกฤษ) 2:

Before formally components make salt spray corrosion test, the first step in accordance with 5.2.1 to 5.2.2, run the machine for more than 12 hours, and note whether the measurement barrel smoke settlement amount is 1 ~ 2ml / h, Should not adjustable spray tower height, to meet the requirements. (Figure 7)

ผลลัพธ์ (อังกฤษ) 3:

In the formal salt spray corrosion test, the first step 5.2.1 to 5.2.2, the machine will run for more than 12 hours, and pay attention to whether the amount of smoke in the tube is 1 ~ 2ml/h, if you can adjust the spray tower height, to meet the requirements. (Figure 7).