圆形边缘凹坑面积≤5mm*5mm，深度≤0.2mm，单件组件不得超出2

圆形边缘凹坑面积≤5mm*5mm，深度≤0.2mm，单件组件不得超出2处

ผลลัพธ์ (อังกฤษ) 1:

Round edge pit area ≤ 5mm*5mm, depth ≤ 0.2mm, single component shall not exceed 2

ผลลัพธ์ (อังกฤษ) 2:

Rounded edges pit area ≤5mm * 5mm, depth ≤0.2mm, single assembly must not exceed 2

ผลลัพธ์ (อังกฤษ) 3:

The circular edge pit area is less than or equal to 5mm*5mm, the depth of less than 0.2mm, a single component shall not exceed 2