9） 将冰球模具由冰柜中取出置于防旋板上的凹槽内，若有些碎冰在小孔外面

9） 将冰球模具由冰柜中取出置于防旋板上的凹槽内，若有些碎冰在小孔外面，可用挖冰起子将其清除；（如图7）

ผลลัพธ์ (อังกฤษ) 1:

9) hockey die out of the freezer in the anti-rotation Groove on the Board, some crushed ice out of the hole, dug bar is to clear the ice and (Figure 7)

ผลลัพธ์ (อังกฤษ) 2:

9) the puck inside the mold removed from the freezer into the anti-rotation plate recess, if some ice on the outside holes, screwdriver can be used to clear ice dig; (Figure 7)

ผลลัพธ์ (อังกฤษ) 3:

9) will hockey mold by freezer took placed on the anti spiral plate groove, if some pieces of ice in outside the hole, available ice dug screwdriver to remove the; (Figure 7)