1.5.5 在“设定”中点击“线性修正”如图（5）（6），对电流和电压

1.5.5 在“设定”中点击“线性修正”如图（5）（6），对电流和电压进行修正，观察测试数据的变化。如不符合要求，点击“测试温度和电池面积”如图（7）（8），调节功率基准,使标准组件各项参数与标定值偏差符合要求，点击“确认”

ผลลัพธ์ (อังกฤษ) 1:

1.5.5 in "settings" click on "linear correction" as shown in figure (5) (6), amendments to the current and voltage, observe the changes to the test data. If you do not meet the requirements, click on "test temperature and battery area" as shown in figure (7) (8), regulated power base, component parameters and calibration value deviations in line with requirements of the standard, click "confirm"

ผลลัพธ์ (อังกฤษ) 2:

1.5.5 Click on "linear correction" as shown in the "Set" (5) (6), for the current and voltage correction, to observe changes in the test data. If you do not meet the requirements, click on the "test temperature and battery area" as shown in (7) (8), adjust the power reference, so that the parameters of the standard components and calibration deviation meet the requirements, click "OK"

ผลลัพธ์ (อังกฤษ) 3:

1.5.5 "set" in "linear correction" as shown in figure (5) (6), the current and voltage to amend, observe the change of test data. If you do not meet the requirements, click on the test temperature and battery area, such as figure (7) (8), adjust the power benchmark, so that the standard components of the parameters and the calibration value of the deviation to meet the requirements, click on confirmation"