汇流条表面镀锡层应平整、光亮、均匀，不允许有露铜、脱锡、黑斑、锈蚀等现

汇流条表面镀锡层应平整、光亮、均匀，不允许有露铜、脱锡、黑斑、锈蚀等现象,焊接时光滑、无毛刺、无虚焊等现象；焊带超出汇流条1mm以内，汇流带超出焊带部分：10±1mm，焊斑尺寸：6-10mm；汇流条放置方向，且不得有任何扭曲

ผลลัพธ์ (อังกฤษ) 1:

Confluence article surface plating Tin layer should flat, and light, and uniform, not allows has dew copper, and off Tin, and spots, and rust, phenomenon, welding Shi smooth, and no Burr, and no virtual welding, phenomenon; welding with beyond Confluence article 1mm within, confluence with beyond welding with part: 10 ± 1mm, welding spot size: 6-10MM; Confluence article placed direction, and shall not has any twisted

ผลลัพธ์ (อังกฤษ) 2:

Tin-plated layer bus bar should be smooth, bright, uniform, not allowed to have exposed copper, tin off, dark spots, corrosion and other phenomena, welding smooth, no glitches, no Weld phenomenon; busbar ribbon exceed 1mm or less, convergence with exceeding ribbon section: 10 ± 1mm, welding spot size: 6-10mm; busbar orientations, and without any distortion

ผลลัพธ์ (อังกฤษ) 3:

Smooth and bright, uniform, not allowing the exposed copper and tin, dark spots, rust removal and other phenomena, welding time, smooth, no burr, no weld etc. phenomenon bus tin surface layer stress; welding with beyond the bus bar 1mm, convergence zone beyond the welding strip part: 10 + 1mm, the welding spot size: 6-10. The bus bars placed direction and are not allowed to have any distortion