2.3 组件接线盒引出线正负极如图（10）（11），连接好组件与模拟器

2.3 组件接线盒引出线正负极如图（10）（11），连接好组件与模拟器的连接器如图（12）。注意正负极性，模拟器引出线红色为正极黑色为负极，红色与组件的正极相连，黑色与组件负极相连

ผลลัพธ์ (อังกฤษ) 1:

2.3 Assembly junction box pinout is negative figure (10), (11), connect the component with a simulator connector as shown in figure (12). Pay attention to the positive and negative polarity, and Simulator lead red is positive, black is negative, the red component is connected to the cathode, black and components connected to the cathode

ผลลัพธ์ (อังกฤษ) 2:

2.3 module junction box as shown in the positive and negative lead (10) (11), connected with the simulator connector assembly shown in (12). Note that the positive and negative polarity, red is positive simulator lead black is negative, positive red and components connected to the negative electrode connected to black and assembly

ผลลัพธ์ (อังกฤษ) 3:

2.3 component wiring box lead to positive and negative pole (10) (11) (), connect good components and the connector of the simulator (12). Note that the positive and negative polarity, the simulation leads to the positive and negative for the positive black, red and the component of the positive electrode, black and the component of the negative